EPSQ INSTRUCTIONS

 DOWNLOADING From this Page

1.  Select here to download Subject Edition.

 Subject2_2.exe

2.  Install a new version of EPSQ 2.2

1. You should have downloaded the Subject Edition, Version 2.2
2. Using File Manager or Windows Explorer, go to the directory where you downloaded the installation file subject2_2.exe
3. Double click on Subject Edition (subject2_2.exe) and follow the screen instructions to install the EPSQ 2.2 program.

3.  Restore Data into the new 2.2 version

1. Log into the "new" EPSQ 2.2 version
2. Select "Receive From Security Officer" from the Communications Menu.
3. Change the Drive and Directory as appropriate to locate the backup file (ie change the drive to a: and find your zdb file).
4. Highlight the backup file with your mouse and press the OK button.
5. Type in your SSN and password. The form is loaded.

INSTRUCTIONS FOR USING EPSQ

 1.  Once in the EPSQ program you will need to go to CREATE at the top of the page.

 2.  There you will click USER FORM.

 3.     On the next screen you will need to bubble in the first bubble, "Request for Security Clearance (SF 86).

 4.     On the next screen you will need to bubble in as follows:

           -Single Scope Background Investigation (SSBI) for a  TOP-SECRECT CLEARANCE

           -National Agency Check (NAC or NACLC) for a SECRET CLEARANCE

5.     The next screen you will need to read the info and then press enter.

6.  The next screen will ask for your social security number, which you need to provide, but when it asks for the password right  underneath your social, you need to skip over that part and just  click OK.

 7.     From this point you should be ready to begin filling out the SF86.

 8.     You must go back 7 years for employment and resident history. Do not leave any gaps between dates.  Also included all relatives that apply to you in section 6.  

 9.     Once you push NEXT after the first screen, your information will automatically save in case you need to quit the program for some reason.

 10.      To go back to your SF86, just click MODIFY at the top of the EPSQ Program and then click user form and enter your SSN.

 11. To make sure all of your info is correct, click VALIDATION at the top of the EPSQ program and type in your SSN.  This will show all errors you have made or have not made.  To correct any errors once again go back to MODIFY.

 12. Once you have corrected all errors, you will need to save your file to a disk.  To do this go to COMMUNICATIONS and select PREPARE FILE TO GIVE TO SECURITY OFFICER.

 13. You will then need to change the drive to "A:" and then change the file name to your last name, keeping the dot zdb (EX:  BAKER.zdb)

 14. You are now finished.  You will now need to bring your disk up to Security Division, BLDG 463.

PLEASE INSURE TO VALIDATE YOUR CLEARANCE BEFORE BRINGING TO SECURITY DIVISION.